A V G A nti- V irus Bus ines s E dition 2 0 1 1 © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
2 5
warnings or errors), there is no need to go through the configuration process again
(unless you wish to change something).
If there is a configuration problem, you will be briefly informed about the reasons, and
the information will be highlighted in red color. In such cases you need to go through
the whole wizard to correct the problem.
In the
Server roles
section you must choose which server role(s) you want to run on
this server. You need to select at least one option, but you can also select both. The
options are as follows:
·
DataCenter role
Allows central management of AVG stations configuration via the AVG Admin
Console, collects scan results from AVG stations, shows components states and
much more.
If you choose to install this role only, proceed to the
DataCenter Role
chapter.
·
UpdateProxy role
Serves as a proxy server for downloading and distributing updates to your
stations.
If you choose to install this role only, proceed to the
UpdateProxy role
chapter.
If you select both options, proceed to the
DataCenter Role
chapter.
3.4. DataCenter Role
Select if you are deploying AVG Admin Server for the first time or repeatedly:
·
I am deploying the AVG Admin Server for the first time
·
I am deploying the AVG Admin Serve again over an existing database
3.5. DataCenter Role - First Deployment
If you have selected in the
Current state of AVG Admin Server
step (see chapter
Role Selection
) the
DataCenter Role
, and you are deploying the application for the
first time, you will experience the following dialog.
Note:
If you are deploying the database repeatedly, please proceed to the chapter
Repeated deployment
.
