A V G A nti- V irus Bus ines s E dition 2 0 1 1 © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
1 6 1
In the
Setup parameters
section you can choose from the following options:
·
Enable Windows Firewall after installation
- in case you are not going to
install AVG Firewall component, you can choose to enable Windows Firewall as
soon as the installation is completed.
·
Reboot the computer after finishing AVG 2011 setup if needed
- in certain
cases (Firewall component installation for example) a computer restart may be
required to complete the installation process.
·
Display a notification message regarding scheduled system restart on the
remote computer
- If the previous checkbox is checked, you can also define a
delay before the restart will take place. The default value is ten minutes.
·
Select type of installation progress visibility
- from the drop down menu
select one of the following:
o
hidden installation
- no information will be displayed to the currently
logged user during the setup process.
o
show installation progress only
- the installation will not require any
user attention, but the progress will be fully visible on the station.
o
show installation wizard
- the installation will be visible on the station
and the currently logged user will need to manually confirm all steps.
In the
Setup properties
section you can choose from the following options:
