Avery Berkel CX20 SERIES, Руководство по обслуживанию

Страница: 126 / 353

10 — Error Messages
10–9 CX20/CX30/CX34 Service Manual
Meaning/What you should do Message
NO POS You have not set up a POS machine on the network and
can only print a maximum of 500 receipts. Part 3 of the
Users’ Handbooks describes how to set up a POS
machine.
NO PRINTER REPLY Indicates no response from the printer microprocessor
when the scale microprocessor tries to communicate with
it.
To rectify the fault:
1. Check the printer EPROM IC36 is the correct firmware
number. Check the access time is 150 ns or less. Check
the EPROM is fitted in the socket correctly.
2. To help identify the problem, Switch 1 of SW2 on the
main PCB can be swtiched on and off to initiate a test print.
This will indicate whether the printer is partly functioning.
3. If the problem persists change the main PCB. See
Section 11.
NO SLAVES You are trying to copy the PLU file to the slave machines
when the master thinks that no slaves are on the network.
Enter the ID of on–line slaves at the master (see Part 3 of
the Users’ Handbooks).
NO SPACE LEFT You cannot enter any more characters in the text. Edit
the text.
You are trying to load a file from the DCU which exceeds
the available memory at the machine.
NOT FOUND The PLU entered does not exist. Ensure you entered the
correct number. Program the PLU.
NO TRANSACTIONS There are no current transactions assigned to your
operator key.
There are no outstanding transactions to be cleared.
NO TRANS MEMORY You cannot use the master. Connect another machine set
to sub department 0 to the master pin. Amend the network
map. Re–assign keys if necessary.
NO WEIGHT CHANGE You are trying to enter a transaction whilst the previously
weighed goods are still on the machine. Remove the
goods.
NT WGHT OVERFLOW You are trying to label items with a net weight of more than
9999 g. Split the items into smaller packs and label each
pack.
OUTSIDE RANGE You are trying to enter a number which is more or less than
that expected by the machine.
PAPER LOW The printer is low or out of paper. Replace the roll.
PICK UP INHIBITED You cannot use pick up because the value entered for the
pick up is greater than the amount in the drawer.