Avery Berkel CX20 SERIES, Руководство по обслуживанию

Страница: 334 / 353

Addendum B — Phase 1.5/1.5.3 and New Main PCB
B–13 Addendum B
B.11.2 Setting the rate
Select the function SET RATE in service mode. Enter the appropriate data.
The euro currency symbol is number 35.
The SET RATE function is reserved exclusively for the euro rate and is currency
reference 5. Users can only program rates 1 to 4 in Phase 1.5.3 and should not
program the euro rate in SYSTEM X, CURRENCY.
B.11.3 Programming euro price information
The euro price information can be printed in the following format on a receipt:
each transaction price and the total price printed in euro at the end of the
receipt
total price only printed in euro after the local currency total price
the message DUPLICATE FOR GUIDANCE ONLY can be printed or
suppressed
Euro printing must be enabled for labels.
The printed euro information is programmed in PRINTER SETUP, EURO
PRINTING.
B.11.4 Assigning euro keys
Assign currency 5 to a soft key. This is the euro payment key.
Assign the EURO PRINT key to a soft key. This enables operators to print euro
price information on request when euro printing is disabled on the receipt.
B.11.5 Euro conversion
When the national currency ceases to be legal tender you will need to change
all prices to the euro equivalent.
Enter the official rate in SET RATE. Then select the function EURO
CONVERSION. The message SURE ? Y/N appears. Only press Y if you are
absolutely certain that you have entered the official rate and the euro is now
legal tender as this function converts the entire product file.
***IMPORTANT***
Ensure you are absolutely certain that you wish to convert prices. If you
make a mistake all prices in the entire product file will be wrong.