Avery Berkel CX20 SERIES, Руководство по обслуживанию

Страница: 66 / 353

6 — Configuration
6–3 CX20/CX30/CX34 Service Manual
6.1 Introduction
Each machine is configured to operate to customer’s requirements. The
CONFIGURATION mode enables you to change the machine’s configuration.
On networks the system is also configured in this mode.
NOTE: All machines on a network must be configured to operate in the
same weight system, that is: metric, avoir or cental. These cannot
be mixed.
Throughout this section the diagrams in the ”What You See” column represent
the display screens on CX30/CX34 machines. The bottom right–hand display is
the alphanumeric commodity display which, on CX20 machines, is situated
below the ticket mouth and is of LCD type.
6.2 Configuration procedure
NOTE: To enter service mode refer to Section 5.2.
6.2.1 Configuring the machine
What You Do What You See
1 In configuration mode
(CONFIGURATION is displayed),
press ENTER. The machine
configuration code number will
appear: the left–hand digit (Option 1)
flashes.
1111111111111
2 From Table 6.1 select your 16–digit
machine configuration code number
and type it in. You can use the
←
and
→
keys to move left and right.
6429112112411
3 Press ENTER. On a slave scale
configuration finishes at this point,
however, a master scale prompts for
SYSTEM ? (Y/N) Y allowing you to
configure the system.
OR
ENTRY ACCEPTED
CONFIGURATION
Y/N Y SYSTEM ?