33
4.8 Relay Setting
The I/O device must be installed to use this function.
To set the Relay Setting:
1. Click the drop-down list and select the relay ID number.
2. Enter relay name.
3. The system automatically detects the card and input number. In the Content
section, enter relay description.
4. In the test section, click
Test
to trigger relay. Red is high and Green is low.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the
setting.
4.9 Alarm Setting
In the Alarm Setting dialog box, click
Add
to insert and set new alarm setting, click
Delete
to remove the selected alarm setting, click
OK
to exit and save the setting,
Cancel
to exit without saving, and
Default
to revert back to original factory setting.
(7)
(1)
(2)
(3)
(4)
(5)
(6)
To set the Alarm Setting:
1. Click
Add
to insert and set a new alarm setting. Click the items in the
(7) Alarm
Setting List
, if you want to modify the alarm setting.
2. In
(1) Alarm Setting number/Name/Description
,
display the selected alarm
setting number in the list below. Enter alarm name and description.
