9
Chapter 3 Using the DVR Software
3.1 Running the Unit for the First Time
When the unit is turned on for the first time, the system will prompt you to enter the
serial number. The serial number is inside the package.
3.2 Function buttons in Advanced/Preview Mode
Name
Function
(1) Exit
Click it to minimize or exit the system. You can find the software
information in the “About”.
(2) Volume
Adjust the audio volume to a proper volume.
(3) Split Screen Mode
It provides 6 split display modes for your selection. You can select one
of the split display modes by clicking the following icon.
1-Cam display
4-Cam split display
9-Cam split display
16-Cam split display
8-Cam split display
13-Cam split display
(4) Record
Click
to start recording. The button turns violet when it is
recording. Click it again to stop
(5) E-Map
Click
to load up to 8 desired E-Maps in BMP or JPG image
format, and locate cameras, sensors, and relays to desired positions.
(6) Network
Click
to allow inbound connections. When this function is
enabled, the button turns violet. Click it again to disable all inbound
connections.
