26
4.3 Recording Setting
In the Recording dialog box, click
OK
to accept the new settings, click
Cancel
to exit
without saving, and click
Default
to revert back to original factory setting.
(10)
(11)
(12)
(9)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the
cameras, enable the
ALL
check box. To select more than one camera,
Right click
on
the camera icon. To select one camera only,
Left click
on the camera icon. The
camera icon turns red when it is selected.
(2) Recording Mode
The blocks from 00 to 23 represent the time in 24-hour clock. To record in full 24 hours,
select the recording mode and click the
button. If you want to only record at a
particular time, click the colored block beside the recording mode then click on the
time blocks. When the system starts recording a red triangle mark would appear at the
upper left corner of the screen. The recording modes are listed below:
-
Always Recording
Record the video from the selected camera and save it to the designated storage
path (see also
Chapter 4.1 #1
).
-
Motion Recording
Start recording the video from the selected camera only when the system detects
movement. Once a motion is detected, the system automatically saves the
previous frames and stop based on the
Start Record Prior
and Stop
Record
After settings
.
-
Smart Recording
Automatically switch to recorded at the maximum frame rate setting once a
motion is detected and if there is no motion, it records at the minimum frame rate
setting Set the maximum and minimum frame rate setting in
(7) Frame Rate
section.
-
Voice Detecting Recording
DVR system will record the sound when the voice exceeds the intensity value in
Voice Detection setting.
-
No Recording
The system won’t do any recording.
