Avermedia NV 5000, Руководство пользователя

Страница: 31 / 125

23
2.2 NV DOM Series Hardware Installation
2.2.1 Minimum System Requirements
First, must verify if the computer meets the minimum system requirements.
CPU Pentium

4 3.2GHz or Pentium D 3.0 GHz above recommended
Motherboard ASUS P5LD2-VM
GIGABYTE GA-8I945GMF
GIGABYTE GA-945GM-S2
OS
Windows XP Embedded
Expansion Slots
1/2/3/4 × 32-bit PCI 2.1 compliant slots
RAM
DDR 512MB or above
Hard disk 120GB of free hard disk space, or at least 60GB free space for each partition
Media
CD-ROM drive
VGA ASUS EN7300GS/HTD/256M
ASUS EAX1300 PRO
GIGABYTE GV-RX13128D-RH
Audio
Sound card and speakers
i
For Product Hardware Recommendation list update,
go to http://www.avermedia.com/nvd/hardware-recom.asp.
Before installing the cards, the computer must be turned OFF , the power cable must be
UNPLUGGED and all other cables that are attached at the back of the computer must be
DISCONNECTED .
When installing multiple cards, it is important to arrange the cards in sequence so that the cables
would not tangle up.
2.2.2 DOM Installation
AVerMedia
®
NV DOM series integrate the DVR software on a DOM(Disk on Module). User only needs to
install the DOM, and then the DVR software is ready for operating.
1. Remove the PC case cover
2. Plug the DOM on DOM cable
3. Plug one side of DOM cable to IDE slot and another end of DOM cable to DVD-RW if there is a available
DVD-RW
4. Plug the DOM power cable to DOM and another end of cable to motherboard power connector
5. Close the PC case cover and connect all the devices
6.
Now, user can power on the PC
2.2.3 Installing NV5000 Card
1. Remove the PC case cover.
2. Remove a bracket that covers the PCI slot. Save the screw.
3. Press the NV5000 card into the PCI slot firmly.
4. Secure the card with the screws.