manualshive.com logo in svg

AVE RegCom-Pro, Руководство по эксплуатации

Поделиться
Скачать
AVE RegCom-Pro Скачать руководство пользователя страница 44

44

 RegCom-Pro  POS / Cash Register Interface

RANGE

Choices: 00,000,000.00-99,999,999.99

The Range defines the limits of the Operator. These are numeric only.  As you can see from the previous examples,
the range has two separate fields that are separated by a double-sided arrow. This format must be followed.

To program the range, click on SET RANGE  button, SET RANGE  page  will appear then program  RANGE that you
desire in the set range and then click SET  button if range not correct click CLEAR button and then  program  correct
range again.

4. PROGRAMMING

Figure 96: Set Range Section

OPERATOR

Choices: NONE, IN, OUT

The Operator determines the behavior of the Range. Think of the Operator in mathematical terms. Setting the correct
range and specifying “IN” or “OUT” will make the Operator perform “greater than”, “less than”, “equal to”, “in the range”, or
“out of the range” calculations.

With this version of the RegCom-Pro, you can define ranges for your exceptions and have the RegCom-Pro alarm when
an exception falls within the range’s parameters or outside the range of the two numbers. The choices are “IN”, “OUT”,
and “NONE”. To program the operator, Select “EXCEPTION REPORT” Tab, In EXCEPTION STRING section  then select
NONE or IN or OUT in OPERATOR drop-down menu.

Содержание RegCom-Pro





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды