manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Руководство по устранению неполадок и отладке, Страница: 66 / 74

Поделиться
Скачать
Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 66

66

NN47250-700  (Version 04.01)

SM Feb 02 01:01:19.207044 DEBUG SM-EVENT: (13) rssi -68, rate 108, idle 163 secs

SM Feb 02 01:01:19.207122 DEBUG SM-EVENT: (13) idle timer is tracking (17480 to go)

SM Feb 02 01:01:34.207524 DEBUG SM-EVENT: (13) rssi -68, rate 108, idle 178 secs

SM Feb 02 01:01:34.207601 DEBUG SM-EVENT: (13) idle timer is tracking (2494 to go)

SM Feb 02 01:01:36.677033 DEBUG SM-EVENT: (13): wireless idle timer fired; killing

Client has been unresponsive for 180 seconds, so the idle timer fires and SM begins to 
remove the session.

SM Feb 02 01:01:36.677129 DEBUG SM-STATE: (13) mac 00:0b:7d:26:9d:d7, flags 28812fh, to change state 
ACTIVE -> KILLING, by sm_handle_idle_timeout

State transition from “Active” to “Killing” initiated by SM.

SM Feb 02 01:01:36.677199 DEBUG SM-EVENT: (13) sending aaa/sm/notify to fsm AAA author

SM Feb 02 01:01:36.677248 DEBUG SM-EVENT: (13) sending sm/killing to fsm sm central fsm

SM Feb 02 01:01:36.677293 DEBUG SM-EVENT: (13) sending aaa/sm/notify to fsm net/igmp

SM Feb 02 01:01:36.677336 DEBUG SM-EVENT: (13) sending net/dot1x/eapol/dying to fsm net/dot1x/eapol

Let other processes in NOS know that the client’s session is being torn down.

SM Feb 02 01:01:36.677491 DEBUG SM-TRACE: (13) added proc hist @485a9cac (6 by 
aaa_sm_notification: not roam-out, and SL_AAA set); 6 total

SM Feb 02 01:01:36.678567 DEBUG SM-STATE: (13) remove from metering, curr KILLING, prev ACTIVE

Heard back from other cleanup process.

SM Feb 02 01:01:36.678744 DEBUG SM-EVENT: (13) disabled forwarding for 00:0b:7d:26:9d:d7 on "2050" 
(tag 1 mapped to 1)

Remove the FDB entry for the client.

SM Feb 02 01:01:36.679018 DEBUG SM-EVENT: (13) decrementing loadbal session on port 2050

Decriment the loadbalance counter on the AP the client was attached to.

SM Feb 02 01:01:36.679116 DEBUG (13) sm_do_client_boot: 00:0b:7d:26:9d:d7 will be removed from AP 
w/o deauth frame

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов