manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Руководство по устранению неполадок и отладке, Страница: 46 / 74

Поделиться
Скачать
Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 46

46

NN47250-700  (Version 04.01)

DOT1X Apr 11 20:45:37.984333 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 9, len 38, received 
from 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.984361 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.984709 DEBUG DOT1X-PACKET: EAPoL EAP packet of 8 bytes w/id 10 
(without retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.984828 DEBUG DOT1X-STATE: 00:0d:54:98:99:6d transition from 
AUTHENTICATING to AUTHENTICATED

Since this example is being processed entirely on the WSS (local), there is no “PASS from 
AAA” statement, instead it jumps right to the “AUTHENTICATED” state.

DOT1X Apr 11 20:45:37.984957 DEBUG EAPOL-STATE: request authorization for AVAYA\tash at 
00:0d:54:98:99:6d

Authorization is beginning. This is a very common area for configuration mistakes that 
prevent clients from connecting.

DOT1X Apr 11 20:45:37.985771 DEBUG DOT1X-STATE: AVAYA\tash at 00:0d:54:98:99:6d is authorized

No error message here, everything was processed successfully. If you wanted to see the 
authorization process you could turn on “set trace authorization”. Generally you won’t 
need to because warnings will be displayed in the syslog and trace log when a client fails 
due to authorization.

DOT1X Apr 11 20:45:37.986004 DEBUG DOT1X: begin a WPA 4way handshake with 00:0d:54:98:99:6d

Because this is WPA, we have a 4-way handshake for the unicast session key. The 
handshake follows:

DOT1X Apr 11 20:45:37.986030 DEBUG DOT1X: Sending message 1 of the 4way Handshake

DOT1X Apr 11 20:45:37.986055 DEBUG DOT1X-PACKET: EAPoL packet of 99 bytes (with retransmit 
set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.986082 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 5 seconds
DOT1X Apr 11 20:45:37.987021 DEBUG DOT1X-STATE: TX RSC is 0 for client AVAYA\tash at 
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:38.007289 DEBUG DOT1X-PACKET: EAPoL KEY packet received from 
00:0d:54:98:99:6d

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов