Avaya WLAN Security Switch 2300 Series, Руководство по устранению неполадок и отладке, Страница: 15 / 74

15
Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide
Set trace rf_client level 10 Displays information about clients of Rogue APs. This
includes rogue classification messages.
Set trace rf_master level 10 Displays debug information for rf-detect related activity
on the seed switch.
Set trace rf_slave level 10 Displays debug information for rf-detect related activity
on the member switches of a mobility domain.
Set trace sm level 7 mac-addr <mac-
addr> Sends information on client’s state changes within the
session manager state machine. This includes low-level
802.11 events like “Association”, “Re-Association”, and
“Disassociation”. Specifying the mac-addr parameter
will restrict the entries to be relevant to only a single
mac-address, and is strongly recommended to be used
whenever doing SM tracing.
Set trace tapa Summarizes the tapa traffic and gives specific details on
image downloads and configuration packets sent to the
AP.
Set trace web level 10 Sends information on web-portal authentications to the
trace log.
Show aaa Displays configuration information as well as the current
timeout and up/down status on configured RADIUS
servers.
Show auto-tune attributes Displays a table of the current auto-tune values that the
algorithm uses to measure channel quality.
Show auto-tune neighbors Displays a list of all APs neighboring a given radio,
including BSSID and RSSI values for each.
Show arp Lists the ARP table internal to the switch.
Show crypto certificate
{admin|web|eap} Shows a decode of the certificate in the specified cert-
store. Useful for verifying signature on cert, time/date
validity, and common name on the cert.
Show dap counters [#] Displays radio statistics on the daps for everything from
noise-floor to per-packet data rates.
Show dap etherstats Displays packet statistics for the DAPs Ethernet ports.
show dap qos-stats Displays transmit packet counts for each queue on the
AP.