Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 51

Страница: 51 / 74

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

This message is printed when the WSS updates the initial username (outer) with the final
inner username. This is relevant to TTLS clients primarily.

DOT1X Apr 11 20:33:05.205114 DEBUG DOT1X-STATE: AVAYA\jtran at 00:05:5d:88:d1:63 is authorized

Passed authorization successfully.

DOT1X Apr 11 20:33:05.208927 DEBUG DOT1X-STATE: sending keys to 00:05:5d:88:d1:63

DOT1X Apr 11 20:33:05.212506 DEBUG DOT1X-STATE: Putting AVAYA\jtran at 00:05:5d:88:d1:63 in vlan
vlan-eng (130)

Placing the client on the proper VLAN.

DOT1X Apr 11 20:33:05.216127 DEBUG DOT1X-STATE: AVAYA\jtran --> tag 3 for vlan 130, cipher 4,
bssid 00:0b:0e:00:d5:83

This is information regarding the WSS to AP connection used for this user.

DOT1X Apr 11 20:33:05.220068 DEBUG setting (nth) client AVAYA\jtran rekey period to 9

The rekey period refers to broadcast key rolling. As each client is added, this value is set to
match the next switch-wide rollover period.

DOT1X Apr 11 20:33:05.223596 DEBUG DOT1X-PACKET: sending 13 byte multicast key with index 3 to
AP

DOT1X Apr 11 20:33:05.227310 DEBUG DOT1X-PACKET: sending 13 byte unicast key with index 0 to
AP

We send the keys down to the AP.

DOT1X Apr 11 20:33:05.235460 DEBUG DOT1X-PACKET: sending group key to 00:05:5d:88:d1:63

DOT1X Apr 11 20:33:05.239054 DEBUG DOT1X-PACKET: EAPoL packet of 61 bytes (without retransmit
set) sent to 00:05:5d:88:d1:63

DOT1X Apr 11 20:33:05.243420 DEBUG DOT1X-PACKET: sending empty eapol keymsg to
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.247019 DEBUG DOT1X-PACKET: EAPoL packet of 48 bytes (without
retransmit set) sent to 00:05:5d:88:d1:63

We send key packets to the client.

Содержание WLAN Security Switch 2300 Series











































































Результаты поиска

Содержание WLAN Security Switch 2300 Series

Отзывы:

Avaya WLAN Security Switch 2300 Series, Руководство по устранению неполадок и отладке, Страница: 51 / 74

Результаты поиска

Содержание WLAN Security Switch 2300 Series

Отзывы: