Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 74

Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 59

59

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

SM Jan 4 02:52:41.187131 DEBUG SM-STATE: (2) mac 00:10:c6:5d:ae:ae, flags 0h, to change state
AUTH,ASSOC REQ -> AUTH AND ASSOC, by sm_dot11_handle_associate

SM Jan 4 02:52:41.187205 DEBUG SM-EVENT: (2) sending net/dot1x/eapol/associate to fsm net/dot1x/
eapol

Informing the 802.1X state machine of the new client.

SM Jan 4 02:52:41.187291 DEBUG SM-TRACE: (2) added proc hist @484c13ac (3 by
sm_dot11_handle_associate); 1 total

SM Jan 4 02:52:41.187353 DEBUG SM-STATE: (2) sm_dot11_handle_associate bumps kill lock vector to 2h

Adding a process hook and setting a lock.

SM Jan 4 02:52:41.187398 DEBUG SM-EVENT: (2) incrementing loadbal session on port 2049

Make a note that we have another session on DAP 1 for use with AP load balancing.

SM Jan 4 02:52:41.188453 DEBUG SM-TRACE: (2) added proc hist @484c132c (3 by wifi_association); 2
total

SM Jan 4 02:52:41.188529 DEBUG SM-STATE: (2) wifi_association bumps kill lock vector to ah
SM Jan 4 02:52:41.188571 DEBUG SM-ROAM: (2) wifi_association bumps roam refcount to 1

More process hooks and locks.

SM Jan 4 02:52:43.203223 DEBUG SM: (2) 00:10:c6:5d:ae:ae i_smdb_set_ingress_filter NULL by
set_smdb_from_author_attrs

Checking to see if there is a User-based ACL (filter-id radius attribute) defined for this
client.

SM Jan 4 02:52:43.203320 DEBUG SM: (2) 00:10:c6:5d:ae:ae i_smdb_set_vlan_name=NULL by
set_smdb_from_author_attrs

Checking to see if there is a VLAN associated with this client.

SM Jan 4 02:52:43.203711 DEBUG smdb_insert_vlan: store ("default"+cruft, tot 18): 0

The client belongs on VLAN “default”. Insert this into the session entry.

SM Jan 4 02:52:43.203781 DEBUG SM: (2) 00:10:c6:5d:ae:ae i_smdb_set_vlan_name=default by
set_smdb_from_author_attrs

Client session is configured for vlan default.

«
...
57
58
59
60
61
...
»

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов