Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 74

Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 32

32

NN47250-700 (Version 04.01)

Verify system availability

To verify the system availability, perform the following:

In the Web browser, check if the Web UI shows port 443.

Check the Administrative Web UI through SSL on port 8003.

Check if the command line for the WLE2340 is available, if none of the Web UI is
available. This can be done at the WLE2340 with a serial connection, or remotely if
remote access is enabled.

Unavailability of CLI

If the CLI is unavailable remotely, it can be possible that the SSH is not running or there is a basic issue with
the WLE2340. The user needs to get physical access to the UI and then attempt to log on to the command line.

If the CLI is unavailable from a direct serial connection, then attempt to restart. If the WLE2340 does not boot
it can be defective.

Availability of CLI and unavailability of standard Web UI

In this case, it is most likely that the Controller has not started.

Enter the following:

Syntax

show system status

and verify that there are two java processes started. If not, restart the WLE2340 or the WLE2340.

Availability of Disk Space

If disk space is unavailable, then there is issue with the df command. If the

/dev/sda1

portion shows 100% full,

then this is due to the logs. To verify, perform the following:

1

rm /opt/platform/server/controller/*log*

2

rm /opt/platform/server/agent/*log*

3

Edit /opt/platform/server/controller/*log* with vi.

4

Restart the WLE2340

Password lost for Standard Web UI

To check the lost password, perform the following:

Login as another Admin User

Verify Admin User availability

Login as another Admin User

If it is possible, login as another admin user then delete and re-create the user.

«
...
30
31
32
33
34
...
»

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов