Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 74

Avaya WLAN Security Switch 2300 Series Скачать руководство пользователя страница 45

45

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

DOT1X Apr 11 20:45:37.909044 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.925427 DEBUG DOT1X-PACKET: EAPoL EAP packet of 57 bytes w/id 5 (with
retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.925464 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds
DOT1X Apr 11 20:45:37.962307 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 5, len 6, received
from 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.962336 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.962565 DEBUG DOT1X-PACKET: EAPoL EAP packet of 84 bytes w/id 6 (with
retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.962596 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds
DOT1X Apr 11 20:45:37.963605 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 6, len 40, received
from 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.963633 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.963702 DEBUG DOT1X-CLIENT: glob ** matches AVAYA\tash eap_type=25

The first phase of PEAP has completed, and now the inner MSCHAPv2 exchange is
starting. This is the inner username. In Microsoft clients the inner and outer names are
always the same. In other clients they can be different and the outer name is frequently
“anonymous” or some variation therein.

DOT1X Apr 11 20:45:37.963797 DEBUG DOT1X: asked to change name AVAYA\tash at 00:0d:54:98:99:6d
to AVAYAtash

DOT1X Apr 11 20:45:37.963865 DEBUG DOT1X-PACKET: EAPoL EAP packet of 105 bytes w/id 7
(with retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.963895 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds
DOT1X Apr 11 20:45:37.981434 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 7, len 94, received
from 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.981464 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.982306 DEBUG DOT1X-PACKET: EAPoL EAP packet of 82 bytes w/id 8 (with
retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.982343 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds
DOT1X Apr 11 20:45:37.983318 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 8, len 29, received
from 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.983348 DEBUG DOT1X-PACKET: Cancelling retrans timer for
00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.983460 DEBUG DOT1X-PACKET: EAPoL EAP packet of 42 bytes w/id 9 (with
retransmit set) sent to 00:0d:54:98:99:6d
DOT1X Apr 11 20:45:37.983490 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds

«
...
43
44
45
46
47
...
»

Содержание WLAN Security Switch 2300 Series











































































Отзывы:

Нет отзывов