Avaya WLAN Security Switch 2300 Series, Руководство по устранению неполадок и отладке, Страница: 16 / 74

16
NN47250-700 (Version 04.01)
Show dap status Shows current operating parameters for DAPs as well as
serial#, IP, state, SSIDs, BSSIDs, current channel/power
and other useful information.
Show dap status terse Abbreviated version of “show dap status” which is very
useful for “at-a-glance” status on DAPs and APs.
Show dap unconfigured Shows DAPs which are contacting the mobility domain
but are not configured on any of the WSSs. Contains all
the required information to configure a DAP (model,
serial).
Show dot1x clients Shows usernames, MAC address, dot1x state, and
encryption of currently connected clients
Show dot1x config Shows current dot1x related configuration parameters.
Show dot1x stats Shows counters of various portions of the dot1x state
machine.
Show fdb Shows the forwarding database within the switch. This is
useful for verifying L2 forwarding paths through the
switch
Show fsm statistics Shows the amount of time the CPU has been spending in
various portions of NOS’s finite state machine. When
high CPU load is observed running this command at
regular intervals will help narrow down which portions
of the code are consuming the most CPU time.
Show ip https Displays IP addresses of clients that have connected to
the HTTP server as well as the time since last
connection. Useful for checking to see if multiple WMS
servers are talking to one WSS.
Show ip route Displays the routing table for packets sent from the
WSS. The WSS does not route client packets, so this has
no impact on client data at all.
Show load Shows average CPU load since boot as well as the
average CPU load since the command was last run
(labeled “delta”).
Show memory sum? Shows memory allocation (elements and bytes) for
various portions of processes. Run this command
regularly on a particular process to help find memory
leaks.