Avaya S8700-Series, Установка и настройка

Страница: 42 / 122

Chapter 4: Server configuration
42 Installing and Configuring the Avaya S8500-Series Server
3. Click Install . The system responds with a message that installation of authentication file is
successful.
If you get a
filesync failed
message, ignore it.
Configuring the server manually
Note:
Note:
If you are configuring the server as a main server, the license files and the
authentication files must be downloaded on the server. See
Installing the license
and authentication files on page 41.
Setting the date, time, and time zone
!
Important:
Important:
Be sure to set the date, time, and time zone before manually configuring the
server. Failure to do so may cause network problems.
To set the date, time, and time zone:
1. From the Main Menu, under Server, click Server Date/Time .
2. In the Server Date/Time window, verify the date and time are correct. If the date and time
are incorrect:
a. Enter the date in the format mm/dd/yyyy .
b. Enter the time in 24 hour format ( hh:mm ).
c. Enter the time zone.
d. Click Submit .
e. Reboot the server: For more information, see Rebooting the server on page 42.
Rebooting the server
1. Click Shutdown Server under the Server heading.
2. Select Delayed Shutdown and Restart server after shutdown .
3. Click Shutdown .
You will be logged off the server when it reboots. When you are waiting for the system to
reboot, enter
ping -t 192.11.13.6 from a command prompt window on your services laptop
computer to start a continuous ping command.