Avaya S8700-Series, Установка и настройка

Страница: 37 / 122

Installing Communication Manager
Issue 8 May 2009 37
Installing Communication Manager
!
Important:
Important:
When you upgrade a duplicated ESS from an earlier release of Communication
Manager to Release 5.2 or later, the duplicated ESS uses the PE Active Server IP
address (IP-alias). The upgraded duplicated ESS uses the PE Active Server IP
address that is shared by the duplicated ESS pair.
In a situation when the duplicated ESS is upgraded and is running Release 5.2 or
later and the main server pair is not yet upgraded and is still running release 5.1.
x
or prior, the main server has no concept that the duplicated ESS has a PE Active
Server IP Address. In this interim state, special consideration must be given to
the administration for the duplicated ESS.
Use a Telnet session to access the information on the CD-ROM.
1. On your Services laptop computer, click Start > Run to open the Run dialog box.
2. Type
telnet 192.11.13.6
and press Enter to view the first screen.
Note:
Note:
To navigate on these screens, use the arrow keys to move to an option, and then
press the spacebar to select the option. Press
Enter to submit the information on
the screen.
3. Select Install , ensure that <OK> is highlighted, and press Enter .
4. On the Select Release Version screen, ensure that the Build line and <OK> are
highlighted. Then press Enter .
5. Press Enter to format and partition the hard disk drive and the SSD.
The program starts the installation and displays the progress. This process takes
approximately 20 minutes to complete.