Avaya S8700-Series, Установка и настройка

Страница: 67 / 122

IPSI address configuration
Issue 8 May 2009 67
Note:
Note:
Ensure that you have the password before proceeding.
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type
command
and click OK to open a MS-DOS Command Line window.
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
4. To log into the IPSI, use SSH and the IP address
192.11.13.6
.
For information on how to use SSH, see Accessing the command line interface of the
server with SSH on page 95.
Note:
Note:
While connected to the IPSI, type
help
or
?
to obtain online help. Most
commands have two or three letter abbreviations.
5. Type
ipsilogin
and press Enter .
Note:
Note:
The craft login used on the IPSI has a different password from the craft login used
on the servers.
6. Log in as
craft
.
Prompt = [IPADMIN]:
7. Type
show control interface
and press Enter and then type
show port 1
and
press Enter to see the current control interface settings.