Avaya IP Office Phone Manager, Руководство по установке, Страница: 401 / 411

IP Office Installation Page 400
15-601042 Issue 20b (16 July 2009) IP Office
11.9.4 European Union
1. 999 and 112 calls must not be barred. Doing so will invalidate the approval.
2. All connections at the MDF shall be identifiable by suitable labeling.
3. The CE mark displayed on IP Office equipment indicates the systems compliance with the EMC, LVD, and R&TTE
Directives and common technical regulations for Primary Rate and Basic Rate ISDN.
4. All ports for the connection of other non-telecommunications apparatus have a Safety Extra Low Voltage (SELV) safety
status.
11.9.5 New Zealand
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item
complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom,
nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product
is compatible with all of Telecom's network services.
11.9.6 FCC Notification
This equipment is registered with the ACTA (Administrative Council for Terminal Attachments) in accordance with FCC
Part 68 of its rules. In compliance with those rules, you are advised of the following:
•
Means of Connection
Connection of this equipment to the telephone network shall be through a standard network interface jack.
Connection to 1.544-MBps digital facilities must be through a USOC RJ48C. Connection to the Analog Trunk
facilities must be through a USOC RJ45S.
•
Notification to the Telephone Companies
Before connecting this equipment, you or your equipment supplier must notify your local telephone company's
business office of the telephone number or numbers you will be using with this equipment.
•
The facility interface codes (FIC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1) are 04DU9.BN,
04DU9.DN, 04DU9.IKN, 04DU9.ISN.
•
The facility interface code (FIC) for analog trunk connection (i.e IP400 Office Quad Analog Trunk-LS) are OL13A,
OL13B, OL13C, 02AC2, 02LA2, 02LB2, 02LC2, 02LR2, 02LS2.
•
The facility interface code (FIC) for analog trunk connection (i.e. IP400 Office ATM16-LS/GS) are OL13A, OL13B,
OL13C, 02AC2, 02GS2, 02LA2, 02LB2, 02LC2, 02LR2, 02LF2.
•
The Service Order Code (SOC) for 1.544-MBps digital connection (i.e. IP400 Office PRI-T1) is 6.0Y.
•
The Service Order Code (SOC) for analog trunk connection (i.e. IP400 Office Quad Analog Trunk-LS) is 9.0Y.
•
Disconnection
You must also notify your local telephone company if and when this equipment is permanently disconnected from
the line or lines.
•
Hearing Aid Compatibility
The custom telephone sets for this system are compatible with inductively coupled hearing aids as prescribed by
the FCC.
Ringer Equivalence Number (REN). The REN is used to determine the number of devices that may be connected to the
telephone line. Excessive RENs on the line may result in the devices not ringing in response to an incoming call. In most,
but not all, areas, the sum of the RENs should not exceed five. To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the local telephone company to determine the maximum
REN for the calling area.