Avaya IP Office 8.1, Описание продукта, Страница: 42 / 478

Product Description
IP Office 8.1 © 2012 AVAYA All rights reserved.
Page 42
Issue 26.k.- (16 August 2012)
Personal Line Termination
Allows you to assign a line / lines to specific extension / extensions.
Personalized Station Ringing
Allows you to assign a personalized ring pattern to an extension
POTS (Plain Old Telephone Set) Support
POTS (single line analog telephones) are supported on the system. They are connected to an analog station
port on the Combo module; a port on the Phone-2, Phone-8 or Phone-16 module, or to an ETR port.
Privacy
Privacy prevents other users from joining on your call.
Recall
Use this feature to send a timed switch hook flash over the telephone line to “recall” a new dial tone or to
access certain central office features, such as Call Waiting or 3-way calling.
Redialing Features
There are two features which offer redial functionality:
·
Last Number Redial (FEATURE 05): Last Number Redial redials all digits dialed on the last outside call
except account codes.
o
On 1400 Series telephones, there is a fixed Redial button, which allows you to scroll through and
redial the last 20 number called from that telephone set.
·
Save Number Redial (FEATURE 04): Saves into temporary memory the last outside number (up to 28
digits) dialed from a system telephone. Use this feature to save a number before you hang up on a
busy or unanswered call. Once saved, the number can be redialed at any time. The number stays in
memory until a different one is saved.
Remote Call Forwarding / Mobile Twinninng
Remote Call Forwarding is supported. This feature (FEATURE 11) allows a user to send internal and external
calls destined for a particular extension to an external phone number (off the system) over an analog trunk.
Remote Call Forwarding will not alert the internal extension, but immediately sends the call out to the
predefined number.
Remote Access to the Built-in Modem
This feature allows for unattended access to the built-in modem (x76) by calling into the system:
·
by a DID number, or
· by transferring to the modem via the Automated Attendant.
When an Automated Attendant Selector code with the "Transfer To Number" action has the modem as its
destination, the system will transfer the call to the built-in modem.
Ring on Transfer
This is used to specify what the caller hears while they are being transferred. If Ring on Transfer is set to
Active, callers hear ringing while they are being transferred; if it is set to Not Active callers hear beeps or Music
on Hold if this is activated and a music source is connected to the system.