Avaya IP Office 8.1, Описание продукта

Страница: 36 / 478

Product Description
IP Office 8.1 © 2012 AVAYA All rights reserved.
Page 36
Issue 26.k.- (16 August 2012)
Call Timer Display
Displays the duration of a call from the time it was answered.
Call Waiting
Call waiting applies to analog, single line telephones, and applies to the following types of calls:
·
Intercom calls
·
Transferred calls
·
Forwarded calls
·
Covered calls
·
Outside calls (if the extension has a line appearance of the line)
·
Voice Signaled calls
Caller ID Features
The following Caller ID features are supported:
·
Caller ID Inspect (FEATURE 17)
Allows you to view Caller ID information for a second call, without disconnecting the current call or
putting it on hold. Use this feature to inspect ringing, active, or held calls.
·
Caller ID Name Display (FEATURE 16)
When an incoming call is ringing at a display telephone, both the name and number appear on the
user’s display. The Number is displayed on the top line, and the Name on the 2
nd line. In some cases
users may wish to see the Caller ID Name on the top line and the Caller ID Number on the 2 nd line.
This feature provides this capability.
CO Disconnect Time
Use this feature to change the hold disconnect time for an outside line. Different telephone companies use
different length signals. The length of the signal is called the CO or Hold Disconnect time. If you place a call on
hold and the caller hangs up, but the call does not disconnect within a minute after the caller.
Conference Drop
On 1400 and 9500 digital telephones, you may choose which specific party you want to drop from a conference
call. On ETR and analog telephones, the last party added to the conference call is automatically dropped.
Conferencing
The system supports up to 64-party conferencing. A maximum of 2 analog lines can be in any conference call.
Conference calls may consist of combinations of analog lines, digital lines (PRI/T1, SIP), analog telephones, ETR
telephones or digital telephones.
Contact Closure Support for 2 Devices
The IP500 V2 Control Unit has a Contact Closure control jack on the back panel. This is a 3.5 mm stereo jack
that can drive two external adjunct relays.
This feature allows users at eligible extensions to control an external adjunct by entering feature codes at their
system or standard telephone. The port can control a variety of devices, the most common being door strikes,
night bells, lighting, or voice recording systems.
Copy Settings
This feature allows a System Administrator to copy extension-specific programming from one extension to
another. When the Extension Copy operation is performed, the destination extension will have the same
properties as the originating extension.