Avaya Cajun P580, Руководство пользователя, Страница: 241 / 770

Document No. 650-100-700, Issue 1 8-29
Configuring Ports
Using the All Ports Configuration Window
You can apply the same parameter settings on all of a module’s ports using
the All Ports Configuration dialog box.
To configure all ports on a module:
1. Select Configuration from the Modules & Ports group on the Web
Agent window. The Module Information dialogue box opens ( Figure 8-
2 ).
2. Select the port number from the Ports column for that module. The
Physical Port Configuration dialog box for that module opens ( Figure 8-
5 for Gigabit modules and Figure 8-7 for 10/100 modules).
3. Select All Module Ports Configuration. The All Ports Configuration
dialog box opens.
4. See “ Configuring Physical Ports on 10-Gigabit Ports ,” “ Configuring
Physical Ports on Gigabit Ports ,” and “ Configuring Physical Ports on
Fast Ethernet Ports ” earlier in this chapter to configure the ports.
5. Click APPLY to save your changes, or Restore to restore previous
settings.
Configuring Switch Ports Settings
This section contains the following procedures:
■
Configuring Switch Ports
■
Using the All Module Ports Configuration Window
■
Viewing Switch Port Settings
Configuring Switch Ports
You can configure how each switch port performs its switching functions
(for example, VLAN parameters, hunt group assignments, trunk mode, and
frame tag scheme) through the switch port parameters.
You can configure switch port parameters using either the Web Agent or the
CLI.