Avaya Cajun P580, Руководство пользователя, Страница: 252 / 770

8-40 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 8
4. Use the following command to enable known mode on a port or port
range:
set port known-mode <mod-swport-range> enable
* Note: To prevent the flooding of frames that have unknown
destination addresses, enter all ports on the same
VLAN as the port for which you are enabling MAC
address lock.
5. Use the following command to enable intrusion traps on a port or port
range:
set port intrusion-trap <mod-swport-range> enable
6. Use the following command to set the intrusion trap timer to other than
the default setting:
set port intrusion-trap-timer <mod-swport-range> <intrusion-trap-
timer-value>
Using the All Module Ports Configuration Window
The All Ports Configuration window allows you to apply the same
parameter settings to all switch ports in a module using a single command.
To set all switch ports in a module using a single command:
1. Select Configuration from the Modules & Ports group on the Web
Agent window. The Module Information dialog box opens ( Figure 8-
2 ).
2. Select the switch port number listed for that module from the Switch
Ports column. The Switch Ports dialog box opens.
3. Select All Module Switch Ports Configuration. The Switch Ports
Configuration - All Ports dialog box opens ( Figure 8-10 ).