Avaya Cajun P580, Руководство пользователя, Страница: 464 / 770

15-14 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 15
4. Click CREATE to create the virtual link, or CANCEL if you do not
want to create the OSPF virtual link.
CLI Command
To create a OSPF virtual link, use the following command:
(configure router: ospf)#
area <area-id> virtual-link
<router-id>
Deleting OSPF Virtual Links
You can delete OSPF Virtual links using either the Web Agent or the CLI.
Web Agent
Procedure
To delete an OSPF virtual link using the Web Agent:
1. Select Virtual Links from the Routing > IP > OSPF group on the Web
Agent window. The OSPF Virtual Links dialog box opens ( Figure 15-
5 ).
2. Select the virtual link that you want to remove.
3. Click DELETE. The virtual link is removed.
Dead Interval Time in seconds that a router's Hello packets have not
been seen before it's neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attached to a
common network.The value range is 1-65535. The default
is 40.
Authentication Type of authentication available for use on a given OSPF
interface. Authentication types include:
• None (default)
• Simple Password
• MD5 Authentication
Authentication
Key Authentication key for the Area.
MD5 Key ID MD5 authentication key ID as a decimal value. The
values range is 1-255.
Table 15-4. Add OSPF Virtual Link Dialog Box Parameters
Parameter Defines the...
2 of 2