Avaya Cajun P580 Скачать руководство пользователя страница 389

Страница: 389 / 770

Document No. 650-100-700, Issue 1

12-73

Configuring IP Routing

6. Select the number in the Downstream Interface(s) field. The DVMRP

Downstream Link(s) dialog box opens.

7. See

Table 12-29

for an explanation of the DVMRP Downstream Links

dialog box parameters.

Interface Type

The interface type. Types include:

• Broadcast - All traffic is forwarded through the

routers. This is not a tunnel and does not require
encapsulation.

• IPIP Tunnel - All multicast traffic (data and protocol

messages) on this interface is encapsulated in IP
unicast packets with the protocol set to IPIP (IP in
IP).

• Non-Encapsulated Tunnel - All multicast data traffic

on this interface is IPIP encapsulated, but the protocol
messages are simple unicast.

Interface is
Pruned

Status of whether the interface has been pruned.

Prune
Expiration
Time in sec

Time (in seconds) that the interface times out waiting for
the prune message to expire.

Table 12-29. DVMRP Downstream Links Dialog Box Parameters

Parameter

Displays the...

Destination Group
Address

Destination group address.

Source SubNetwork

Source subnetwork.

DVMRP Downstream
Interface

DVMRP Downstream interface.

1 of 2

Table 12-28. Upstream Prune Information Dialog Box Parameter

Parameter

Displays the...

2 of 2

Содержание Cajun P580



































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Cajun P580

Отзывы:

Avaya Cajun P580, Руководство пользователя, Страница: 389 / 770

Результаты поиска

Содержание Cajun P580

Отзывы: