Avaya Cajun P580, Руководство пользователя, Страница: 609 / 770

Document No. 650-100-700, Issue 1 21-9
Monitoring the Avaya Multiservice Switch
CLI Command
To set which categories of protocol events generate notifications, use the
following CLI command:
(configure)#
logging protocol event {rip | ospf | dvmrp | ldap |
cli | snmp | appletalk | vrrp} {fault | error | warning | info | trace |
debug}
Setting Log Size
You can set the log size using either the Web Agent or the CLI.
Web Agent
Procedure
To set the log size using the Web Agent:
1. In the navigation pane, expand the Events folder and then click General
Events.
The General Event Management Web page is displayed in the content
pane. See
Figure 21-2 .
2. In the Max Log Entries field for the event log, select the number of
entries that you want the event log to store.
The default setting is 512 entries.
3. In the Max Log Entries field for the shutdown log, select the number of
entries that you want the shutdown log to store.
The default setting is 16 entries.
4. Click APPLY.
Warning Noncritical errors. The default setting is Disable.
Info Event details. The default setting is Disable.
Trace Packet traces. The default setting is Disable.
If you enable Trace logging, all protocol packets sent and
received are logged as protocol events.
Debug Event messages used to troubleshoot a network problem.
The default setting is Disable.
Table 21-3. Protocol Event Categories
Event Category Explanation
2 of 2