Avaya Cajun P580, Руководство пользователя, Страница: 644 / 770

23-12 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 23
CLI Command
To set up an RMON mirror port by using the CLI, enter the following
command from Enable/Configure mode:
(configure)#
set port mirror <mod-port-range>
Setting Up Port Mirroring on a Switch in Fabric Mode 2
Fabric mode 2 port mirroring provides the ability for 80-series modules to
monitor traffic that a port transmits and receives. Four channels are
provided for monitoring traffic, so you can monitor four different ports or
port ranges simultaneously. You can set up Fabric mode 2 port mirrors by
using either the Web Agent or the CLI. The switch must be in Fabric mode
2 to perform Fabric mode 2 port mirroring.
Restrictions
* Note: (RN000075) If you attempt to set up port mirroring on a port
that is administratively disabled, and you configure the
disabled port as a source or mirror port, note the following:
Traffic sent to a disabled source port will be lost. A disabled
port set up as a mirror port will not be able to send any traffic
to a monitoring device.
We recommend that you check any ports to be used in port
mirroring to ensure that the ports are active.
* Note: When using Fabric mode 2 port mirroring, you cannot mirror
transmit traffic of multiple source ports to one mirror port.
* Note: When you use Fabric mode 2 port mirroring, both the source
port and mirror port must either:
—
Be on the same VLAN and have the same VLAN binding
or
—
Have VLAN binding set to bind to all
Max Packets per
Second Displays the number of packets per second that are served by the mirror port.
* Sampling only applies to inbound traffic.
Table 23-3. Port Mirroring Configuration Web Page Parameters
Parameter Definition
3 of 3