Avaya Cajun P580, Руководство пользователя, Страница: 686 / 770

25-26 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 25
* Note: You must use the CLI to set up ACLs for QoS. Do not attempt
to use the IP Access Control Web page in the Web Agent to set
up ACLs for QoS.
Examples:
Standard ACL
Rules
Table 25-15. Examples: Standard ACL Rules
To... Enter...
• Use the DSCP in the packet to
classify all traffic that has a source
IP address in the 10.10.60 subnet.
• Mask the three least significant bits
of the DSCP.
access-list MyAccessList1 4 permit
use-diffserv mask 10.10.60.0
0.0.0.255
Assign a priority of 7 to all traffic that
has a source IP address in the 10.10.70
subnet. access-list MyAccessList1 5 permit
use-priority 7 10.10.70.0 0.0.0.255
• Replace the existing DSCP with a
DSCP of 5 for all traffic that has a
source IP address in the 10.10.80
subnet.
• Mask the three least significant bits
of the DSCP
access-list MyAccessList1 6 permit
remark-diffserv 5 mask 10.10.80.0
0.0.0.255
Use the layer 2 priority of the packet
to classify all traffic that has a source
address in the 11.11.11 subnet access-list MyAccessList1 7 permit
use-l2 11.11.11.0 0.0.0.255
Use the DSCP in the packet to classify
all traffic that has a source IP address
of 199.93.239.168 access-list MyAccessList1 8 permit
use-diffserv host 199.93.239.168
• Use the DSCP in the packet to
classify all traffic that has a source
IP address of 3.3.3.3
• Mask the three least significant bits
of the DSCP
access-list MyAccessList1 9 permit
use-diffserv mask host 3.3.3.3
Assign a priority of 2 to all traffic that
has a source IP address of 1.1.1.1 access-list MyAccessList1 10 permit
use-priority 2 1.1.1.1
Block all traffic that has a source IP
address of 10.1.0.55 access-list MyAccessList1 11 deny
10.1.0.55