Avanzini DRAGO D1/M, Инструкция по эксплуатации и обслуживанию

Страница: 51 / 104

CHAPTER 5
Instructions, use and maintenance manual
age
5.7.5. POSITIONING THE TEMPERATURE PROBE
IMPORTANT!
Only for holes in the cooking surface.
CAUTION!
In case a new oven is being installed, protect the temperature probe by means of a shrink-wrap
gaiter to prevent any contact with the h midity released d ring the first se, ca sing early wear.
STEP ACTION PICTURE
1
Insert the temperature probe in the hole made
previously in one of the following positions:
• mm above the coo ing s rface ig.
• in proximity of the intersection between the
cooking surface and the wide wall of the oven
(Fig. “B”);
A
B
2
Position the probe so that its tip is not sticking out
from the cooking surface or the oven vault, but instead
stays levelled with the same surface.
3
roceed to fi the probe in the visible part, side wall
or oven base using an expansion plug or screw,
depending on the material.
4
Secure the probe wire so that it cannot be moved
accidentally.