Avanzini DRAGO D1/M, Инструкция по эксплуатации и обслуживанию

Страница: 16 / 104

CHAPTER 2
Instructions, use and maintenance manual
Page 16
2.6. OPERATOR QUALIFICATIONS
efer to the following table to establish with certainty what s ills and alifications are re ired of the operators
in charge of the various duties (starting up, cleaning, routine maintenance).
QUALIFICATION DEFINITION
OPERATOR
This is the user's trained staff authorised to use and run the machine for production
purposes, for the activities it was built and supplied for.
He/She must be capable of performing all of the procedures required for good machine
operation and his/her personal safety and that of other workers.
Have proven experience in the correct use of this type of machine/system and be trained,
informed and instructed thereof.
st report any anomaly to his s perior in case of do bt.
MECHANICAL
MAINTENANCE
ENGINEER
ENGINEER
alified maintenance engineer able to carry o t preventive corrective maintenance
activities on all the mechanical parts of the machines subject to maintenance or repairs.
alified engineer who can access all the parts of the machine for a vis al analysis,
inspect the state of the equipment, carry out adjustments and calibrations.
alified engineer able to
• run the machine as an operator;
• intervene on the mechanical elements for adjustments, maintenance and repairs;
• read pneumatic and hydraulic diagrams, technical drawings and spare parts list.
In exceptional cases, he/she is trained to run the machine under reduced safety conditions.
Where necessary, it can provide the operator with instructions for the proper use of the
machine for production purposes.
ote he she is not a thorised to wor on live electrical systems if installed .
MECHANICAL
MAINTENANCE
ENGINEER
ENGINEER
alified maintenance engineer able to carry o t preventive corrective maintenance
activities on all the electrical parts of the machines subject to maintenance or repairs.
alified engineer who can access all the parts of the machine for a vis al analysis,
inspect the state of the equipment, carry out adjustments and calibrations.
alified engineer able to
• run the machine as an operator;
• working on the adjustments and on the electrical systems for maintenance purposes,
repairs and replacing worn parts;
• reading wiring diagrams and checking the proper functional cycle.
Where necessary, it can provide the operator with instructions for the proper use of the
machine for production purposes.
The assembly technician can work while the electrical circuits in the electrical panel,
nction bo es, control appliances, etc. are live only if the technician is s itably alified
I . ee legislation .