Avanzini DRAGO D1/M, Инструкция по эксплуатации и обслуживанию

Страница: 36 / 104

CHAPTER 4
Instructions, use and maintenance manual
Page 36
4.5. WORK CYCLE
The machine is designed to heat a food industry oven for baking bread and/or pizza.
The operator turns on the control unit then sets, if necessary, the temperature required inside the oven.
he control nit a tomatically t rns on the ame, the ame of the b rner d ring the first phase has the f nction
of heating the oven and maintaining its temperature.
ring the second phase, instead, the ame is increased in order to coo the prod ct inside the oven.
When the programmed temperature is reached inside the oven, the control unit modulates the blade increasing it
again when the detected temperature drops below a value that was previously set from the control unit.
t the end of the wor cycle, the operator switches off the ame and the control nit.