Avante International Technology, Inc.
Version
4.4.3
31
4.2.3 Tally Accuracy Test (Optional)
To verify that the voting machine tabulates the vote cast correctly, you can get a tally of all the
test votes you cast in the last section. To get the tally, enter the correct screen touch-code as
explained in Figure 4.2.3A (For information on how to set screen touch-code, refer the Ballot
Generation Module
Î
Database Settings)
When the correct touch-code is entered, the following screen, Figure 4.2.3B will ask for polling
officials’ username and password. The default user names are 11 and 22. There are no
passwords. Enter 11 and press “OK’ then enter 22 and press “OK”.
Figure 4.2.3B
The screen is divided into nine areas.
The screen touch-code is a specific
combination of 6 touches of any of
these nine areas. A touch on the first
of the six preset areas starts the
count; any subsequent incorrect touch
will set the count back to zero. Only
when the six preset areas are touched
in the correct sequence will the next
screen appear for entering password.
Figure 4.2.3A
