Avante International Technology, Inc.
Version
4.4.3
12
If everything is functioning, the Figure 4.1.3I message will appear, otherwise the Figure 4.1.3J
message will appear. Again report any problems to the supervisor for repair. A sensor error will
not stop the voting process. Press “OK” to continue.
Figure 4.1.3I
Figure 4.1.3J.
The final test is for the counters. The counters are increased by one increment. Note the counts
on both counters and press “OK”, Figure 4.1.3K. A visual check is made to see if both moved up
one count.
Enter “Yes” or “No” depending on the counter function test. If the answer to the counter function
test is “No”, the voting program will be terminated and the system will shut down, Figure
4.1.3N. This voting unit is not suitable for conducting an election until the counter is repaired.
Figure 4.1.3K
Figure 4.1.3L
Figure 4.1.3N
