Avante International Technology, Inc.
Version
4.4.3
20
4.2 Open Poll on Election Day
Make sure the VOTE-TRAKKER™ is connected to a UPS backup system and plugged into a
working electrical outlet before turning on the voting machine. Press the Power On/Off
switch button at the rear bottom of the VOTE-TRAKKER™ to turn on the system. This will
turn on the computer and other hardware components. Wait until the system boots up and
you see the following screen, Figure 4.2A.
Check at the corners of this window to make sure the touch screen is working. The touch screen
calibration should have been tested prior to delivery. If the touch screen is functioning properly,
then press the “No” button to move to the next screen, Figure 4.2B will appear. If the touch
screen is off calibration (meaning the pointer is not exactly where your finger touch is), then use
your finger to adjust the position to get the arrow to point to the “Yes” button. When the arrow
is over the “Yes” button, press the screen to activate the calibration program. Details of the
calibration program are described in section 6.3.
Figure 4.2A
Figure 4.2B
