AV Stumpfl SC MASTER 16, Руководство пользователя, Страница: 39 / 139

•
"
Only selected portion of timeline
" .... only the se-
lected portion of the timeline will be considered. If no
portion is highlighted this option cannot be selected.
•
Timecode Offset:
Offset for
the SMPTE timecode generated at the CUE output. The
specified time value is added to the current show time.
When there are several shows running in parallel the time
value of the show that was started first is used for the
timecode.
6.
Select the device port the control data of which are to be
used. Normally, you can leave the default setting. Altera-
tions may only be necessary when several device ports
are used. Now click "
Start
".
7.
Select an MP3 encoder. The encoders listed under "
En-
coder (direct)
" will generate MP3 files without saving any
temporary data on hard disk.
"Encoder (via wave file)"
will temporarily save the sound track as wave file in the
FlashCard directory, use it for MP3 file generation, fol-
lowed by deleting the wave file again. You only need to
make sure that the drive of the FlashCard directory has
enough memory capacity.
SC Master 16 4BProducing a show medium
•
31