AV Stumpfl SC MASTER 16, Руководство пользователя, Страница: 27 / 139

Connection to the computer
For programming, SC MASTER 6/16 interacts with Wings
Platinum. It is the link between multimedia units and computer.
Communication with the computer is via a serial port.
1.
With the devices being deactivated, connect the
RSRS232-IN connector of the SC MASTER 6/16 with a se-
rial port (Com 1...4) of your computer. You should use the
supplied cable STK-C010 to avoid possible problems
caused by ground loop and interfering voltage.
2.
Now switch on the computer and the SC MASTER 6/16
unit.
3.
Start Wings Platinum, load a project or create one. The
device port "Stumpfl SC Net" using the corresponding in-
terface must be set up in the project. When you set up an
SC Net port, the following dialog box will be displayed:
SC Master 16 3BProgramming shows
•
19