VWC-44
6
c.
Support HDMI 1.4a 3D formats, including 1080p/24Hz frame packed, Side by Side, Top-Bottom,
Line interleave and frame sequential for passive 3D display.
d.
Support 3840x1080 side by side and 1080i/60Hz frame packed 3D from Sony FHD camcorder.
e.
Support PIP function in passive 3D display, both main and PIP windows are still with 3D effect.
f.
Special algorithm for perfect synchronization in RH/LH channels to get the most comfortable
passive 3D display.
g.
Support passive 3D image geometry alignment, curved screen display, image stacking and edge
blending.
h.
Convert 1080p/24Hz frame packed 3D from Blue Ray or 1080p/120Hz active 3D signal from PC or
Nvidia 3D Vision card into 720p/XGA 120Hz signal for active 3D display.
i.
Support active 3D image warp (for curved screen display), image stacking (enhance brightness)
and edge blending (enlarge display screen).
3.5
High end video processing
a.
10-bit 4:4:4 full sampling processing with 3D motion adaptive de-interlace, low angle algorithm and
3:2/2:2 movie mode detecting and recovery.
b.
With Picture-in-Picture function (PIP) at any location of the image up to XGA resolution.
c.
Intelligent color adjustment, including preset display modes, hue, saturation, brightness, contrast
sharpness adjustments and RGB separate adjustment for color fine tune.
3.6
Video wall function
a.
Video wall function to split, crop and magnify the image with pixel based overlap region and bezel
adjustment. No additional image splitter is required for edge blending.
b.
Video wall control & edge blending up to 15x15 matrix displays from single image source, no
display number limitation with multi-windows display card.
c.
Image flip and rotation function can be applied to video wall to provide irregular video wall display.
3.7
Image flip and rotation
Built-in image 180 degrees flip down function. This function is convenient for rear projection and
system installation.
3.8
Gwarp PC tool
a.
One PC Gwarp tool can control two projectors.
b.
Geometry alignment up to 17x17 grids. Good for irregular or sophisticated curved alignment.
c.
Embedded with edge blending and color uniformity correction.
d.
Adjustment result can be saved in
AV-BOX
. After finishing adjustment, no more PC is required.
3.9
Features for system integrator
a.
1U size with optional ear mounting rack.
b.
Reliable and durable design for long term industrial and commercial applications.
c.
Able to use low cost projector, no lens shift, warping or edge blend function are required
