AV-Box VWC-44 Скачать руководство пользователя страница 47

Страница: 47 / 57

VWC-44

When [Off] is selected, the OSD menu will remain in the screen until user activates other OSD

function.

Internal Grid Pattern will be also controlled by the time setting in [Menu Time Out] menu. For

[Anyplace] geometry adjustment, we recommend user to set OSD [Menu Time Out] to [Off] to

maintain continuously display of the pattern and OSD on the screen.

14.4.3 [Logo Time Out]

Before the time out of the Splash screen,

AV-BOX

will not execute other commands in the system.

When the input is VGA, if any geometry adjustment occurred, the image position may change due to

projector auto adjustment function. In this case, user can disable projector auto alignment or to set

longer Logo Time Out so that

AV-BOX

will not execute geometry adjustment before projector

finishes auto alignment. A good match in the system power ON procedure and Logo time out will

maintain the image position while user powers ON/OFF the complete system.

14.4.4 [Standby Time Out]—system power ON/OFF control by input signal

This function is to Power ON/OFF complete system through signal source.

14.5 [Setting]

To set the time to show Splash screen.

If zero is selected, then the splash screen

will not be showed during system booting

up period.

If it is set to “60”,

VWC-44

will

automatically

Power off when no input

signal is

detected for 60 seconds. In this

case, the

output signal to projector will

be shut

down as well.

If the projector can also automatically

shut down when no input signal is

detected. User only needs to control

signal source to turn ON/OFF the system.

Содержание VWC-44


























































Результаты поиска

Содержание VWC-44

Отзывы:

Похожие инструкции для VWC-44

Бренды по названию

Популярные бренды

AV-Box VWC-44, Руководство по эксплуатации

Результаты поиска

Содержание VWC-44

Отзывы:

Похожие инструкции для VWC-44

Бренды по названию

Популярные бренды