VWC-44
38
User can set different gain and offset value in RGB separately to do uniformity adjustment.
The minimum area for color uniformity adjustment is 64x64 pixels.
13.6.3.6
[Color] adjustment
Color adjustment is to do white balance and color correction in individual projector. User needs to try
color adjustment from projector first. If it is still can’t fix color difference, user can use [Color] function
to do independent RGB Gain and Offset adjustment.
Any color adjustment will reduce the color dynamic range.
13.6.3.7
[Save File] & [Save to Box]
After finish Gwarp operation, user can save the result in two locations--PC and
AV-BOX
.
Click [Save file] will save the file inside PC and need to use press [Load file] to load back settings.
Click the # under “Save to Box” will save Gwarp result into
VWC-44
. User can create up to 10
different
Gwarp results into
AV-BOX
.
After save the file, please disable [Pattern], [Show Grid] and [Internal Grid] in Gwarp so that user
can see the system OSD through keypad or remote controller.
Next step is to activate
AV-BOX
OSD to load Gwarp result under [Anyplace]
[Gwarp] menu.
Please
load Gwarp results separately through OSD operation. In case user only needs to do
Gwarp
adjustment in one channel but not both, please only load the one that you need. User can
access to
[5x3 Curved] menu to activate original manual warp settings.
Please combine with [Video Wall] and [Edge Blend] functions through OSD to complete edge
blending processes. User can save the final result into [Profile] menu and recall it at any time.
Maximum 5 profiles can be saved.
Once select [Gwarp] geometry alignment result, all the geometry alignment result will be replaced.
Please note that current Gwarp version has below limitations:
1.
It can only work with PC with Windows 7 OS.
2.
Only Geometry Warp data can be stored to
VWC-44
.
3.
If the application is edge blending, the [Video Wall] and [Edge Blend] settings shall be executed
in hardware system through remote control or front panel keypads.
