VWC-44
27
13 [Anyplace]: Geometry Correction and Edge Blending
a
、
[2x2 Corner]
、
[3x3 Curved] & [5x3] Curved] are for manual geometry alignment through OSD
menu.
b
、
[Edge Blend] provides all the functions for seamless high performance edge blended
image. c
、
[Gwarp Pro] is to recall the setting from [Gwarp] PC tool and store in
AV-BOX
.
13.1 Geometry adjustment range
a
、
The adjustment range is calculated based on the percentage of output resolution in
AV-BOX
setting. Therefore, higher output resolution will have more adjustment pixels.
b
、
Under XGA output resolution, the adjustment range are as follows:
--[2x2 Corner] adjustment in one side: Horizontal: 150 Pixels, Vertical: 100 pixels
--[3x3 curved] & [5x3 Curved] adjustment: Horizontal: 150 Pixels, Vertical: 100 pixels
--Maximum adjustment range in one side: Horizontal: 300 Pixels, Vertical: 200 pixels
--Maximum adjustment range in both side: Horizontal: 600 Pixels, Vertical: 400 pixels
c
、
Under WXGA & 1920x1200 output resolutions, the adjustment range are as follows:
--[2x2 Corner] adjustment in one side: Horizontal: 300 Pixels, Vertical: 200 pixels
--[3x3 curved] & [5x3 Curved] adjustment: Horizontal: 300 Pixels, Vertical: 200 pixels
--Maximum adjustment range in one side: Horizontal: 600 Pixels, Vertical: 400 pixels
--Maximum adjustment range in both side: Horizontal: 1200 Pixels, Vertical: 800 pixels
d
、
Gwarp PC tool has double adjustment range than manual adjustment.
13.2 Procedures for geometry alignment
a
、
User can select the procedures based on different application and conditions. If the
application is for flat screen, then [2x2] alignment will be quicker and enough.
b
、
If curve alignment is required or the flat screen is not flat enough, user can use [2x2]
alignment to draw the corner positions to expected locations. Then apply [3x3] alignment to
alignment the outlines of the image to the required positions following with [5x3] alignment to
do position fine-tune.
c
、
Once finish [3x3] and [5x3] alignment, user can go back to [2x2] alignment to fine-tune the
corner positions.
d
、
After [5x3 Curved] alignment, it still can’t meet expected result or manual adjustment range is
not enough, user needs to apply Gwarp PC Tool for the geometry alignment.
Under [Anyplace] menu, it provides below
functions:
Geometry alignment, including recall
Gwarp PC tool geometry alignment result.
Edge blending and image color correction.
