VWC-44
47
14.5.1 Audio [Mute]
14.5.2 Frame Lock and Smooth Switching Mode
[Frame Lock] will ensure the input and output frame rate synchronize together. When the application
uses multiple
AV-BOX
, the signal in each
AV-BOX
will also have better synchronization without frame
tear. However, when the input timing change or video source have been changed, the output signal will
be broken for short time temporarily and it will cause display devices to re-search input source and no
video image will be displayed during that time. If user wants to eliminate this kind of waiting time, user
can
[Disable] frame lock to maintain continuous output in
AV-BOX
while input source or timing changes. This
kind of Smooth Switching Mode is only available when the signal change is in same vertical frequency,
such as within NTSC or Pal. If the input timing change is between NTSC or PAL, there will be still
temporary signal break and the display devices will re-synchronize the input signal again. When Frame
Lock is [Disable],
AV-BOX
will shorten the time for mode change. The system will also conduct HDCP
verification. This verification process will also take some time. Therefore the time for mode change may
be different in different cases.
There are 4 items under [Settings] menu:
[Mute] Audi mute or enable
[Box ID]: Set control ID
[Profile]: Save profile settings
[Network]: set RS232 and network control
Audio Mute:
[Mute Off] will enable audio output.
[Mute On] will disable audio output.
[Mute] hot key in remote controller is
available