VWC-44
24
11.3
AV-BOX
3D settings
11.3.1
Input Format
]
User can set [Side by Side] as normal setting. When the input signal is integrated with [3D INFO],
then
VWC-44
can automatically switch to [Automatic] to match 3D input format. Once [Side by Side]
3D is detected, then
VWC-44
will switch to [Side by Side] 3D format automatically.
11.3.2 [Output Format]
11.3.3 [1080p 24Hz Output]
If the input is 1080p 24Hz and the projectors can also support this signal with ME/MC processing, please
select [Enable] in [1080p 24Hz Output] to get the best 3D performance.
4 sub-menu under [3D Properties] menu
To set [Right Eye Frame] for RH projector
and [Left Eye Frame] for LH projector.
[Output Fromat] setting is based on the
filter location. If RH optical filter is
installed at LH projector, then user
needs to set LH projector at [Right Eye
Frame]. User can swap [Output Format]
setting to fix wrong position installation
[Input Format] selection:
Select [Automatic] if the 3D signal is
standard 3D formats from Blue Ray player
or sources with 3D INFO inside the signal.
Select [Side By Side] or [Top-Bottom]
based on user’s 3D input sources.
[2D/3D] hotkey on remote controller is for
quick switch among different 3D formats.
