AUX ASW-H09A4/EAR1-dw, Руководство по обслуживанию

Страница: 33 / 76

- 31 -
⑵
Force operation function;
⑶
The air vane’s automatic swing function and the position setting function;
⑷
The buzzer’s driving function;
⑸
The indoor fan’s driving function;
⑹
The timing on-off function;
⑺
The compressor restarting protection function;
⑻
The indoor heat-exchanger overheating protection function under heating mode;
⑼
The automatic defrosting and reheating function under heating mode;
⑽
The anti-cold air functions under heating mode;
⑾
The anti-freezing function under cooling and defrosting modes;
⑿
Self-detecting function
3. The Specification of the main function
⑴
he specialty terms and express:
TA: stands for the indoor ambiance temperature;
TE: stands for the indoor evaporator’s temperature;
TS: stands for the setting temperature;
TW: stands for the outdoor condenser’s temperature;
⑵
Emergency switch
①
The air-conditioner turns off if press on this button when the air-conditioner is working; the
air-conditioner turns on if press on this button when the air-conditioner is off, and it will work in
an automatic mode after press on this button. Then the indication light twinkles for 20
seconds and the air-conditioner does not start working until the working mode to be selected
by the system; the air-conditioner automatically selects one of the cooling, dehumidification,
and heating mode as the working mode according to the indoor air temperature.
a) When TA
≥ 27
℃
, the controller enters into the cooling mode and follows the mode in
working. The setting temperature herein is 24
℃
and the setting wind speed is strong wind;
b) When 20
℃
< TA < 27
℃
, the controller enters into the dehumidifying mode and follows the
mode in working. The setting temperature is 24 ℃ and the setting wind speed is strong wind;
c) When TA ≤ 20 ℃ , the controller enters into the heating mode and follows the mode in
working (The cooling only type runs with the ventilation mode). The setting temperature
herein is 24
℃ and the setting wind speed is strong wind;
d)This mode includes the functions of timing, sleeping, auto-restart (optional), negative ion
(optional), I feel
（ optional ） ; The system mode will not change along with the variety of the
indoor temperature after being selected. The default status of the horizontal air-blade is still.
The operation can be adjustable by receiving the remote signal.
Press this force on-off button without release at least 5 seconds until the ring of the buzzer
rings twice. The controller enters into the trial operation the trial operation time is 30min:
● The sensor of the air-inlet temperature doesn’t function in the period of trial operation. The
compressor starts work after the 3min delay protection (The primary electrifying has no 3min
delay protection), the wind speed of the indoor fan is high wind, the running mode is cooling
mode, and the wind door is maximum opening.
●
There are no anti-freezing protection and high temperature-preventing protection during trial
operation.