background image

 

User Guide 

P. 9

 

Note: 

If the starter kill is installed, your vehicle will benefit from a protection against starter 

motor damage that could occur after remote-starting the engine should the user, by force of 
habit, turn the ignition key to the 

CRANK

 position. 

Shock Sense, Warn-away Sense 

Your system will react to a full shock by triggering the alarm; it can also respond to a lighter shock 
(30 % of the strength of a full shock) by giving a warn-away (without triggering an alarm condition).  

Note: 

After a remote start,

 

although the shock sensor is disabled, all the other alarm-

triggering zones, such as the doors, the trunk or the hood, may still trigger an alarm. 

Disarmed Notification 

This feature will notify the user when the vehicle was left disarmed: after the engine is shut down 
(with the key removed) and all doors are closed, the siren will chirp once after a 10-seconds 
notification delay to warn the user that the vehicle was left unprotected. The notification can be 
avoided by pressing the 

LOCK

 or 

UNLOCK

 button on the transmitter. 

The user will likewise be notified after the system is disarmed using the transmitter. 

Siren Chirps or Horn Honks 

The siren will chirp to confirm basic operations on the System: 

 

By default, upon locking the doors the siren will give one chirp if no protection zone is active. 

 

If a zone is active as the doors are being locked, the siren will give three chirps. 

 

When the doors are being unlocked, the siren will give two chirps if no intrusion was detected. 

 

If an intrusion was detected, as the doors are being unlocked the siren will give four chirps. 

The system can alternatively be set to: 

Warning Mode:

 no chirp during lock/unlock… 

 

unless a zone is active when locking, in which case there will be 3 chirp upon locking  

 

or unless the alarm was triggered, in which case there will be 4 chirps when unlocking); 

Open Zone Notification Mode:

 3 warning chirps if a door is left open 10 sec. after arming. 

No Chirp:

 the siren will not chirp under any circumstance. 

Car Finder 

(Enabled by default.) When enabled, the Car Finder option will help you locate your vehicle by 

generating a pulsating signal through the horn or the siren. To hear the signal, press 

FUNCTION 

then 

LOCK

Siren or Horn Chirp Timing 

The duration of the chirps can be adjusted at installation (from 5 to 200 ms). 

Safe Start 

If this feature is enabled, the user must press the 

START/STOP

 button 2 times within 3 seconds to 

remote-start the vehicle. This will eliminate accidental remote starts, e.g. when children are playing 
with the transmitter. If swap start mode

 

is selected, to remote-start your vehicle press 

FUNCTION 

followed by 

LOCK

. The 

AUX 2

 output can be activated by pressing the 

START/STOP

 button. 

Home Valet 

TM

 

If this feature is installed, the user will have the possibility to remotely set the vehicle to a no-
remote-start mode. 

See home valet

 

section, earlier in this guide, for full instructions

Ignition-controlled Door Locks 

This is an added security feature. If your system was installed with the ignition-controlled door 
locks option, the doors will automatically be locked as soon as the ignition key is turned to the 

IGNITION ON (RUN)

 position while the brakes are pressed. When the key is turned to the 

OFF

 position, 

the doors will automatically be unlocked. 

Содержание AS-6650TW-FM



















Отзывы: