User Guide
P. 11
o
Press the
button for 1 second and release; you will hear a beep. L-01 will appear
on the screen.
o
Immediately press the button and hold it until the temperature is displayed on the
LCD screen.
Note: to change the temperature from Celsius to Fahrenheit, press
+
+
simultaneously.
Multi-car Operation
This option allows the owner of two vehicles, both equipped with System systems, to control both
systems with a single remote control. To control the second vehicle:
•
Press
TRUNK
+
LOCK
buttons simultaneously: ....................
LOCK
•
Press
TRUNK
+
UNLOCK
simultaneously: ............................
UNLOCK
•
Press
TRUNK
+
START/STOP
simultaneously
:
.............................
START
•
Press
TRUNK
+
START/STOP
simultaneously
:
......................
STOP
•
Press
SHIFT
¾
SHIFT
¾
TRUNK:
............................................
TRUNK
Or
•
Press
SHIFT
¾
SHIFT
¾
+
LOCK
: ...........................................
LOCK
•
Press
SHIFT
¾
SHIFT
¾
+
UNLOCK
: ......................................
UNLOCK
•
Press
SHIFT
¾
SHIFT
¾
+
START/STOP:
..........................................
START
•
Press
SHIFT
¾
SHIFT
¾
+
START/STOP:
.................................
STOP
•
Press
SHIFT
¾
SHIFT
¾
+
TRUNK:
.........................................
TRUNK
Note:
Your remote control must be configured for second car operation by the installer.
Note:
In order to access the 2
nd
car operations with the companion remote, Shift button must be
pressed twice quickly and then one more time followed by
LOCK, UNLOCK, TRUNK
or
START
/
STOP
.
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the
START/STOP
button,
simply press the
LOCK
button. Pressing the
LOCK
button will refresh the display and will confirm if
the vehicle was started or stopped.
The Start Confirmation Was Not Received
If after remote starting the vehicle no confirmation was received, simply press the
LOCK
button,
this will
refresh the display. If the vehicle was started successfully, the smoke icon and the
hourglass icon will appear as well as the run time countdown. Pressing the
LOCK
button will also
lock all doors (the lock icon will appear). If the doors were already locked prior to pressing the
LOCK
button, there will be no change
in the status of the doors
i.e. the doors will remain
locked.
•
On models where starter kills were installed, pressing the
LOCK
button will
also activate the starter kill.
•
On alarm models, pressing the
LOCK
button will also activate the monitoring.
The Stop Confirmation Was Not Received
If after remote stopping the vehicle no confirmation was received
i.e. the display did not return
to its basic state
simply press the
LOCK
button, this will
refresh the display. If the engine was
stopped, the smoke icon and the hourglass icon will disappear and the time will be displayed.
Pressing the
LOCK
button will also lock all doors (the lock icon will appear). If the doors were
already locked prior to pressing the
LOCK
button, there will be no change
in the status of the
doors
i.e. the doors will remain locked.
•
On models where starter kills were installed, pressing the
LOCK
button will
also activate the starter kill.
•
On alarm models, pressing the
LOCK
button will also activate the monitoring.
