AutomationDirect IronHorse HGR-37-005-A, Руководство пользователя

Страница: 22 / 38

Page 3–2 IronHorse® Helical Gearbox User Manual – 1st Ed. Rev. B
Chapter 3: Installation, Maintenance and Lubrication
Safety Notification
Please read this entire manual before the assembly or operation of this helical gearbox
to make sure all safety considerations have been exercised and that care and concern for
persons and equipment have been fully understood.
1) Failure to adhere to the instructions in this operating manual may result in severe or fatal
injuries During the operation of this unit, please take all necessary actions to protect personnel
from all moving, rotating, and high temperature sections to avoid harm to personnel There is a
risk of burns caused by hot surfaces when this product is in use Use properly rated protective
gear when working with these products
2)
Only qualified personnel should transport, store, install, assemble, connect, start-up, operate
and maintain this unit
3) When you receive the helical gearbox, please check the outside packaging first If damage is
apparent from shipping and transportation, please refuse shipment from the carrier and contact
AutomationDirect customer service immediately for unit replacement Never install and operate
damaged products
4) Before lifting, please make sure the lifting equipment for this unit is properly rated for the
weight load of this equipment
5) Use the unit only for its intended purpose
6) Never operate the unit without the necessary protection covers or housing firmly in place