AutomationDirect IronHorse HGR-37-005-A, Руководство пользователя, Страница: 15 / 38

Chapter 2: Specifications
Page 2–3 IronHorse® Helical Gearbox User Manual – 1st Ed. Rev. B
IronHorse® Cast-Iron Helical Gearbox Specifications
IronHorse Cast-Iron Helical Gearbox Specifications – Box Size 37
Part Number
Nominal Ratio Actual Ratio Output RPM @ 1750 rpm Input Nominal HP @ 1.0 Ser
vic
e
Fact
or
1
NEMA Mot
or F
rame
Output Shaft Diame
ter (in)
Input P
ower (hp)
Output T
orque (lb·in)
OHL (lb
s)
2
Ef
ficiency (%)
St
ages
Appro
x W
eigh
t (lb)
HGR-37-005-A
5:1 4.88 359
1.0 56C
1
5.91 970 305 93.4
2
32
HGR-37-005-B
2.0 145TC
HGR-37-010-A
10:1 10.02 175
1.0 56C
4.04 1360 388 93.3
HGR-37-010-B
2.0 145TC
HGR-37-015-A
15:1 15.75 111
1.0 56C
2.99 1580 451 93.2
HGR-37-015-B 2.0 145TC
HGR-37-020-A
20:1 19.95 88
1.0 56C
2.49 1670 489 93.3
HGR-37-020-B 2.0 145TC
HGR-37-030-A
30:1 31.02 56
1.5 56C
1.75 1770 565 90.5
3
HGR-37-030-B 2.0 145TC
HGR-37-040-A
40:1 40.08 44 1.0 56C 1.35 1770 615 90.8
HGR-37-060-A 60:1 60.84 29 1.0 56C 0.89 1770 705 90.8
1) Nominal Motor HP is the highest HP 1800 rpm motor to be used with the gearbox under conditions of 1.0 service factor.
Gearbox input power capacity decreases as motor speed decreases and as service factor increases.
2) OHL= Overhung Load ratings are for forces perpendicular to the output shaft and located at the shaft midpoint, such as
from a gear, pulley, or sprocket with a belt or chain. Divide OHL ratings by the applicable OHL K factors shown separately
in the Selection Factors tables. OHL ratings should also be divided by applicable service factors.
3) Maximum Mechanical Ratings are limits based on strength and durability of gearbox components; applicable when
operating time is short and stopped time is greater than or equal to operating time. These ratings are applicable for 1.0
service factor loads, and may require modification depending upon characteristics of the applicable driven loads. Refer to
the “Service Factors” table for more information.